WAEC Syllabus For Technical Drawing 2024/2025 | Download WAEC Syllabus PDF

Today you and I will quickly take a look at the topic “WAEC Syllabus For Technical Drawing 2024/2025 | Download WAEC Syllabus PDF“.

This has become very necessary as several aspirants of the  WAEC examination have been trooping into our website for WAEC guide and asking us several other questions concerning the syllabus for WAEC Technical Drawing to help them prepare.

DO YOU WANT TO SCORE 350+ IN JAMB ? Download JAMB RECOMMENDED CBT APP NOW, Click Here To Download NOW

However, we at O3SCHOOLS have prepared all that you need concerning the WAEC Syllabus for Technical Drawing for  and all the guide you need to pass WAEC at once.

Nevertheless, if you are among those that have been searching for answers to [technical drawing waec 2024, waec syllabus 2024 pdf, 2024/2025 waec syllabus, technical drawing waec 2024, technical drawing past questions pdf, waec past questions and answers on technical drawing pdf, waec syllabus 2024 pdf download, waec gce syllabus for all subject, WAEC Syllabus For Technical Drawing 2024/2025 | Download WAEC Syllabus PDF 2024], then of course you are not the only one searching.

Right here, Right now on this site, you shall get all the information you have been searching for concerning “WAEC Syllabus For Technical Drawing  | Download WAEC Syllabus PDF“

DO YOU WANT TO SCORE 350+ IN JAMB ? Download JAMB RECOMMENDED CBT APP NOW, Click Here To Download NOW

WAEC Syllabus For Technical Drawing  | Download WAEC Syllabus PDF

SCHEME OF EXAMINATION

The Secret To Write And Pass WAEC,GCE & NECO At Once.

JAMB Registration Form  Complete Guide & Registration Details

There will be three papers, Papers1, 2 and 3 all of which must be taken. Papers 1 and 2 will be a composite paper to be taken at one sitting.

PAPER 1

will consist of forty multiple-choice objective questions all of which are to be answered in 1 hour for 40 marks. The paper will consist of two sections, Sections A and B as follows: Section A will consist of thirty questions drawn from the general principles, techniques and uses of plane and solid geometry.

Section B will consist of ten questions in each of two alternative parts: Part I (Building Drawing) and Part II (Mechanical Drawing). Candidates will be required to answer questions in one part only.

PAPER 2

will consist of five essay questions on plane, solid and vector geometry. Candidates will be required to answer any three of the questions in1¾ hours for 60 marks.

PAPER 3

DO YOU WANT TO SCORE 350+ IN JAMB ? Download JAMB RECOMMENDED CBT APP NOW, Click Here To Download NOW

will consist of two sections, Sections A and B to be taken in 2¾ hours for 100 marks.

Section A will consist of three questions requiring sketches of objects, components, symbols and tools used in the Building and Mechanical industries. One of the questions will be compulsory.

Candidates will be required to answer the compulsory question for 20 marks and one of the other questions for 10 marks. The section will require 45 minutes.

Section B will consist of two questions: one on Building Drawing and the other, on Mechanical Drawing. Candidates will be required to answer only one of the questions in 2 hours for 70 marks.

• How To Do Correction Of Name and DOB in Waec Result
• Top 10 secrets of Bright students
• Top reasons why you may fail JAMB  and how to avoid them
• Requirements to study law in any Nigerian University
• Updated list of all federal Universities in Nigeria

DETAILED SYLLABUS

DO YOU WANT TO SCORE 350+ IN JAMB ? Download JAMB RECOMMENDED CBT APP NOW, Click Here To Download NOW

PLANE GEOMETRY

Drawing materials and equipment, types of drawing and applications

Standard Size Drawing A2ISO board and drawing sheet, set squares, drawing instruments, protractor and T-square.

Lines, lettering and dimensioning

Types of lines and their uses. Types and styles of lettering, title blocks and border lines. These should conform to BS 1192 and BS 308A.

Division of lines and its applications

Dividing into a given number of equal parts or proportion and other simple exercises involving mathematical problems

Scales and their uses

Plain and diagonal scales, constructions and their applications, including scale of chords

Angles

Types and their constructions

Triangles, quadrilaterals and other polygons

Regular and irregular polygons: properties and their constructions

Circles

Parts, types, properties and their constructions

Tangents and tangency

Construction and application of principles of tangency to spanner, anchors and other tools.

Inscribed, circumscribed and escribed figures

Definitions, identification and their constructions

Similar figures and areas

Enlargement and reduction by area and side

Loci

Definition and construction of straight line, circle, ellipse, parabola, hyperbola, helix, trochoids (inferior and superior) spiral, cycloid, hypocycloid, involutes and link mechanisms

SOLID GEOMETRY

DO YOU WANT TO SCORE 350+ IN JAMB ? Download JAMB RECOMMENDED CBT APP NOW, Click Here To Download NOW

Lines in space and planes

Location of points and lines in space. True length and angle of inclination of a line. Intersecting lines, plane relationships and traces. Types of planes and edge views of planes

Pictorial drawing: isometric, oblique, perspective

Isometric scales and circles, oblique scales and curves. One and two points perspective, including free hand sketching

Orthographic projection

Multiplane,1st and 3rd angle projection.

Auxiliary projections

Prisms, cones, cylinder, cube, pyramid (right and oblique), including second auxiliary projection

Sectional views and true shapes

True shape of sections of prisms, cylinders pyramids and cones, (ellipse, parabola, hyperbola, circle and triangle).

Development of surfaces

Surfaces of right and oblique pyramids, prisms, cylinders, cones and their truncated parts and frustum .Transition pieces.

Intersection /Interpenetration

Intersections of cylinders, cones, prisms and pyramids

SYMBOLS AND CONVENTIONS

DO YOU WANT TO SCORE 350+ IN JAMB ? Download JAMB RECOMMENDED CBT APP NOW, Click Here To Download NOW

Symbols and conventions used in plane and solid geometry

Examples, the symbol used used to indicate the diameter of a circle.

VECTOR GEOMETRY

Forces: co-planer,con-current and parallel

Graphical determination of esultant, using Bow’s notation. Equilibrant and reaction using triangle and polygon of forces.

Simple framed structure

Determination of reactions and internal forces of members and nature of forces

Shearing force and bending moment diagrams

Simple supported beams and cantilevers with concentrated and uniformly distributed loads

Centre of gravity of lamina

Simple geometrical shapes

NOTE: Vector Geometry is for candidates in Ghana only and will be examined in Paper 2.

BUILDING DRAWING

The recommendations of the current BS 1192 (metric) should be followed

Freehand sketching and identification of building tools

Both pictorial and orthographic sketches of building tools

Foundations and Floors

Types and parts of foundations and floors

Openings – windows, doors and arches

Types and parts of doors, windows and arches

Stairs and staircases

Parts and types of staircases

Roofs

Types and parts of roofs.

Constructional details of parts of buildings

Includes wall, column, beam, lintel, etc.

Working drawings of buildings

Orthographic projections and sectional views

Building materials, freehand sketching, symbols and conventions

Including Electrical and plumbing fittings.

MECHANICAL DRAWING

DO YOU WANT TO SCORE 350+ IN JAMB ? Download JAMB RECOMMENDED CBT APP NOW, Click Here To Download NOW

The recommendations of the current BS 308A (metric) should be followed

Freehand sketching and identification of mechanical tools

Both pictorial and orthographic sketches of mechanical tools

Dimensioning

Limits and fits, allowances, tolerances; emphasis on correct techniques

Screw threads, fasteners and locking devices

Include conventional representation, construction and their applications

Sectioning

Full,half-part,offset,broken,removed,aligned and revolved

Pictorial drawing

Isometric and oblique drawing; including freehand sketching

Working and assembly drawing

Orthographic and sectional views.

Symbols, conventions and abbreviations

Include electrical and plumbing fittings and welding symbols

LIST OF RECOMMENDED TEXTBOOKS

TECHNICAL DRAWING FOR SCHOOL CERTIFICATE AND G.C.E (Metric Edition) by JN GREEN

ENGINEERING DRAWING with worked examples 1 & 2 (3rd edition) by MA Parker and F Pickup

GEOMETRIC AND ENGINEERING DRAWINGby K Morling

GEOMETRIC AND TECHNICAL DRAWINGby A Yarwood

FOUNDATION OF TECHNICAL DRAWING by A. Parkison

TECHNICAL DRAWING with Mechanical Engineering & Drawing option by W.E Kudor

Above is the WAEC Syllabus for Technical Drawing

You Can View The WAEC syllabus For Technical Drawing Below

TECHNICAL-DRAWING-1

OR

Download The PDF file by clicking Here

That’s the much we can take on the topic “WAEC Syllabus For Technical Drawing | Download WAEC Syllabus PDF 2022“.

Thanks For Reading

O3SCHOOLS TEAM